Getting My merak555 login To Work
Getting My merak555 login To Work
Blog Article
The MR55 mount cradle can be utilized to set up your entry stage in an array of scenarios: wall or strong ceiling, below a fall ceiling, on many electrical junction boxes.
We endorse updating the software package driver to the wireless NIC on the client gadget if the customer is struggling to begin to see the configured SSIDs. Alternatively, you may disable AX performance for two.4GHz and 5GHz bands making use of RF profiles.
making use of integrated wall anchors and screws, attach the mount cradle in your mounting wall or ceiling. It is suggested the MR55 be mounted to some wall or strong ceiling using the mount cradle for Bodily security motives.
The MR55 attaches into the mount cradle with two tabs on the cradle that insert into the MR55, and is particularly secured to the cradle using one screw.
If mounting to an electrical junction box, feed the Ethernet cable through the cable obtain hole within the mount cradle.
safety screw – The accent kit involves screws which can be used to secure the entry place for the mount cradle. partaking the safety screw helps prevent accidental dislodging and theft.
the next is a brief overview only from the ways needed to include an MR55 for your network. For thorough Directions about making, configuring and controlling Meraki wireless networks, consult with the online documentation (documentation.meraki.com).
Using the dashed lines about the mount cradle template as being a manual, established the correct spacing in the T-rail clips about the T-rail.
To release the MR55 through the mount cradle, 1st get rid of the safety screw that secures the MR55 to your cradle’s base tab.
The incorporated mount cradle template demonstrates the hole styles that should be employed for Just about every sort of mount.
to connect the MR55 into the mount cradle properly, line up the very best fringe of the AP check here With all the best tab with the mount cradle. Considering that the cradle is now mounted towards the wall, guidebook the MR55 in the direction of the top tab and insert the highest tab in the MR55s slot.
visit the map / floor strategy look at and place Each individual AP to the map by clicking and dragging it to The placement in which you decide to mount it.
The MR55 might be placed on a desk or shelf resting within the non-scratch rubber feet. The mount cradle is not really necessary for a desk or shelf set up.
If being used inside a mesh deployment, the MR55 must have line of sight to not less than two other Meraki gadgets. A Cisco associate might help make sure your AP placement is good.
Attach the T-rail clips to the T-rail by rotating them and snapping them into put as proven. The black foam pads must be compressed somewhat right after set up.
In case the button is pressed and held for at least five seconds then launched, the MR55 will reboot and be restored to its original manufacturing unit settings by deleting all configuration details saved on the device.
Report this page